Treat the water entering your entire house. Whether you're on city water or a private well, we have a system built for it.
Phoenix water doesn't just affect what you drink. It affects every shower, every load of laundry, every dish in the dishwasher, and the lifespan of every water-using appliance in your home. A whole-home system treats water at the entry point so by the time it reaches a tap, it's already soft and clean.
We carry seven different whole-home systems because no two homes are the same. City water and well water need different solutions. Click any system below to see details and photos.
Our flagship system removes calcium and magnesium at the main water line, delivering soft water to every tap in your home. Better skin, longer-lasting appliances, and zero scale buildup guaranteed.
How It Works
Water passes through a tank packed with WQA Gold Seal certified resin beads. Those beads carry a negative charge that attracts the positively charged calcium and magnesium ions, swapping them out for a tiny amount of sodium. What flows out the other side is soft, mineral-free water. The system self-cleans by flushing the resin with a brine solution on a set schedule, recharging the beads and sending the collected minerals down the drain.
Top 3 Contaminants Removed
System Features
Addresses the two most common Phoenix water problems in a single system: hardness and chlorine. Softer water, better taste, better smell, at every tap in the house.
How It Works
The system runs water through two stages. First, granular activated coconut shell carbon captures chlorine, chloramines, and volatile organic compounds before they reach your plumbing. Then the softening resin removes calcium and magnesium through ion exchange. The result is water that is both soft and free of the chemical taste and odor that city treatment leaves behind.
Top 3 Contaminants Removed
Why Coconut Shell Activated Carbon?
Coconut shell activated carbon is the gold standard for chlorine removal. Its surface area is enormous a single gram has more than 1,000 square meters of surface area for contaminants to bind to. Coconut shell carbon outperforms coal-based carbon on taste and odor removal, and it is a sustainable, renewable source. This is why we use it exclusively rather than cheaper alternatives.
System Features
For homes that need whole-home filtration without softening. Removes sediment, dirt, rust, and particulates to protect your plumbing and fixtures no salt, no drain, no maintenance.
How It Works
Water flows through granular activated coconut shell carbon media that physically captures sediment, particulates, chlorine, and organic compounds. A polishing gravel layer below the carbon provides a final mechanical filtration stage. There is no regeneration cycle, no drain connection, and no salt required. The media bed simply filters as water passes through.
Top 3 Contaminants Removed
Why Coconut Shell Activated Carbon?
Coconut shell activated carbon is used here because its tightly packed pore structure is especially effective at trapping fine sediment and organic compounds that standard filters miss. It also has a lower ash content than coal-based alternatives, meaning it does not introduce any byproducts into your water just removes what is already there.
System Features
Reduces the effects of hard water without salt, chemicals, or a drain connection. Natural minerals stay in your water but they are conditioned so they stop sticking to surfaces.
How It Works
Instead of removing calcium and magnesium, a salt-free conditioner changes their physical structure through a process called Template Assisted Crystallization. The minerals are converted into microscopic crystals that stay suspended in the water and pass through plumbing without bonding to surfaces. You will not get the slippery soft-water feel in the shower, but fixtures and appliances will accumulate significantly less scale over time.
Top 3 Contaminants Removed
System Features
Built specifically for Phoenix-area private wells. Two-stage treatment handles iron, sulfur odor, sediment, and hardness in a single integrated system that a standard softener cannot match.
How It Works
Tank one contains Katalox Light filtration media and granular activated coconut shell carbon. Katalox Light uses manganese dioxide to oxidize dissolved iron and manganese, converting them into solid particles that are then captured by the carbon and media bed. Hydrogen sulfide is simultaneously adsorbed by the carbon, eliminating the rotten-egg odor. Tank two then handles softening through standard ion exchange resin, removing any remaining hardness minerals. Both tanks self-backflush on independent schedules.
Top 3 Contaminants Removed
Why Coconut Shell Activated Carbon?
Granular activated coconut shell carbon in the first tank is what makes iron and sulfur removal so effective. The carbon adsorbs hydrogen sulfide on contact and acts as a buffer layer that protects the Katalox Light media from fouling. Without this carbon stage, iron systems load up and fail much faster, particularly in Phoenix-area wells where sulfur and iron often appear together.
System Features
The premium city-water solution. Stage one removes chlorine and sediment throughout the whole house, stage two softens. Maximum water quality at every tap.
How It Works
The first tank is a dedicated carbon filtration tank packed with granular activated coconut shell carbon. It captures chlorine, chloramines, sediment, and volatile organic compounds before water reaches the softener. The second tank is the softening stage, using WQA Gold Seal certified resin to remove calcium and magnesium through ion exchange. Both tanks backflush on separate schedules to clear accumulated contaminants and maintain peak performance.
Top 3 Contaminants Removed
Why Coconut Shell Activated Carbon?
Running a dedicated coconut shell carbon tank ahead of the softener protects the softening resin from chlorine damage. Chlorine degrades ion exchange resin over time, a problem that a single-tank softener cannot avoid. By intercepting chlorine in the first tank, the resin in the second tank lasts longer, regenerates more efficiently, and maintains a higher grain capacity for the life of the system.
System Features
Eliminates iron staining and hydrogen sulfide odor the two most common well water complaints in the Phoenix area. Clear, odor-free water at every faucet.
How It Works
A hydrogen peroxide injection panel doses a controlled amount of peroxide into the water as it enters the system. Peroxide is a powerful oxidizer that instantly reacts with dissolved iron and hydrogen sulfide, converting them into solid particles and harmless byproducts. Those particles are then captured by the granular activated catalytic coconut shell carbon media bed, and the treated water flows into a brine tank that handles any residual softening. The media bed periodically backflushes to clear accumulated iron particles.
Top 3 Contaminants Removed
Why Coconut Shell Activated Carbon?
This system uses catalytic activated coconut shell carbon a specially processed form that has an enhanced surface reactivity beyond standard carbon. Catalytic carbon accelerates the oxidation reactions that break down hydrogen sulfide and facilitates the capture of iron particles more effectively than regular carbon. It is the reason this system can handle the high iron and sulfur loads common in Phoenix-area private wells without fouling the media bed.
System Features
Standard whole home softener. Fixes scale, dry skin, and spotty dishes, the most common Phoenix problems.
Softener with chlorine filtration or City Water Dual Tank. Removes both hardness and chlorine taste/smell.
Well Water Dual Tank or Iron/Sulfur Removal system. Designed specifically for well water issues.
Salt-Free Conditioner. Reduces scale without adding sodium great for low-sodium diets and irrigation lines.
For most Phoenix valley homes on city water, our standard Whole Home Water Softener is the right fit. If you also notice a chlorine smell or taste, the Softener with Chlorine Filtration adds a carbon stage that removes it at every tap. We size the system to your home's square footage and daily usage so it does not regenerate too often or run short.
Phoenix area well water, especially in Queen Creek, Buckeye, Apache Junction, Wittmann, and New River, typically contains iron, hydrogen sulfide, and sediment on top of hardness. A standard softener will be fouled and damaged by those contaminants. Our Well Water Dual Tank handles hardness, iron, sulfur, and sediment in a single two-stage system built specifically for this region.
Salt-free conditioners reduce scale buildup without adding sodium or using a drain connection. They are a good option for Phoenix homeowners on low-sodium diets, anyone with HOA restrictions on salt discharge into irrigation, or people who want zero maintenance. They will not give you the slippery soft-water feel of a salt softener, but fixtures and appliances will show significantly less scale over time.
Many Phoenix area homes built after 2000 have a softener loop pre-plumbed in the garage, which makes installation faster and cleaner. If yours does not have one, our technician ties into the main supply line on site. It is a routine part of the job and does not change the end result.
A typical Phoenix household of four uses 40 to 80 pounds of salt per month, depending on your water hardness and system size. Phoenix water is hard enough that undersized systems regenerate too frequently, burning through salt faster. We size every system correctly from the start, and our salt delivery subscription brings salt to your door six times a year for 29 dollars per month.
Most Phoenix valley whole home softener installations take 2 to 4 hours. We test the water before we leave so you know the system is working correctly on day one.
Louis Water Co offers a lifetime warranty on system dry parts, a 5-year warranty on the control valve, circuit board, and filtration media, and a 1-year labor warranty on the original installation. Storage tanks and media tanks carry a lifetime manufacturer warranty. Control valves are covered for 5 years by the manufacturer.
Yes, and most of our Phoenix customers do both in a single visit. The whole home softener protects your plumbing and appliances while the RO system purifies the water you drink and cook with. Installing both together saves time and ensures the RO membrane is protected by softened water from day one.
Free quote, no in-home visit required. Serving the entire Phoenix valley.